Yearly Archives

39 Articles
News

Cement Production Application

Posted by Sylia on

Rotary kiln is a pyroprocessing device, which is mainly used to raise materials to a high temperature in a continuous process, as the common saying calcinations. does rotary kiln is usually used with the material as follows: cement, lime, refractories, metakaolin, titanium dioxide, alumina, vermiculite, iron ore pellets? etc. According to different material, rotary kiln can be divided into three types, cement kiln, metallurgy and limestone kiln kiln. The cement kiln is mainly used for calcimine of cement clinker; usually, it has two types, wet and dry. The kiln is used in metallurgy industry and ironworks, such as metallurgy lean iron ore, chromium ore and ferronickel ore calcimine. The lime kiln, also named active lime kiln, is used for roasting the active lime which is used in steel and ferroalloy works, and calcined dolomite works. In addition to cement production application, rotary cement kiln can also be used to magnetize lean magnetite ore and magnetized roasting of iron ore; Chromium, nickel-iron-oxidizing roasting; roasting high bauxite ore in refractory plant and roasting clinker and aluminium hydroxide in aluminum factory; roasting chromium ore and chromium ore ore in chemical plant.

Our company also produces lime rotary kiln in short as lime kiln, which is used for roasting active lime dolomite in steel and Ferroalloy Factor. Do do Equipment roasting kilns and cooling kiln heating source use of re-restore back to the converter, gas, electric, or coal, can be divided into the dry section, preheating and heating segment, heating the reaction section of three parts, reduction roasting the ore material temperature is 500-600?, into the cooling kiln, would like to be discharged after cooling the kiln outside watering, the roasted ore was cooled to 80? click. Rotary kilns there are high energy consumption, investment, kiln inner wall of the ease of ring formation phenomenon and higher production costs, the operating process control are higher and other shortcomings. Rotary furnace operation processes but mature, large capacity, high degree of mechanization equipment qualitative, cobalt Desde UNROASTED the restored the preferred. Flotation machine:

News

The Spanish Association

Posted by Sylia on

The Service of Statistical Studies of the AEF has elaborated the report the tax exemption in Spain 2010. According to the closed data of the same to 31 of December of the past year, the set of the system of franchise invoiced a total of 24,651, 4 million Euros, a 0.2% less than 24,699, 5 million invoiced when finalizing exercise 2009. As well, another significant data is the increase in the number of chains franchisors that operate in our country. To the 2010 closing the system was integrated by 934 standards, 15 more than when concluding 2009. Also the number of foreign companies that work in Spain, when happening of the 172 has been increased that was in 2009 to the 177 present ones. On the other hand, a reduction in the number of operative establishments of only a 1.2% has taken place: when finalizing 2009 there were the 57,139 abiertos premises, by the 56,444 registered in 2010.

With respect to the data of the number of employees, altogether the system was employing to 231,603 people when to finishing 2010, whereas in 2009 that number was of 235.075 people, which supposes a reduction of the 1.5%. The Spanish Association of Franchisors presents/displays its study " The tax exemption in Spain 2010" , in that one of the most outstanding data is the invoicing obtained by the system when concluding 2010:24.651, 4 million Euros, solely a 0.2% less than the number registered in 2009, which it was of 24,699, 5 million. In this sense, it excels the data of the increase of the invoicing in the establishments property of the central franchisors, in 533,4 million Euros with respect to 2009 (9,189, 6 million in 2010 by the 8,656, 1 million of 2009). Nevertheless, a reduction of 581.5 million Euros in the invoicing of the character establishments took place franchise-holder, comparing 2010 (15,461, 8 million) and 2009 (16,043, 4 million).

News

Billards Clubs

Posted by Sylia on

Most billiard clubs are divided into three categories: elite private clubs for the wealthy, sports – for athletes, fans (they are often held sports competitions) and recreational clubs, which come to play anyone. You probably already have a question, where to go play pool? The choice of institutions is wide. So focus on a few great options in Moscow and the northern capital. For residents of Moscow, will be an excellent choice billiards "Prince" – the club class. Visitors are invited to play in Royal Hall in the top 30 billiard tables (snooker, and a put of 12 feet) and 2 rooms for VIP-guests.

Conducting professional tournaments, high-quality game tables in the pyramid, the school pool and a beautiful girl markers skrasyaschie your loneliness – these services are provided by the Moscow billiard club "Classic", here is certainly worth a visit. It should also be noted the club, "Dobermann," in which a real separation between the royal table, as well as the perfect club for Russian billiards "The Island of Crimea". St. Petersburg today, of course, remains a billiard capital of Russia. Standing in a pool of amateur tournaments are held at the St.

Petersburg billiards club 'at Avtovskaya, 35', visitors have the opportunity to play in a pool of 40 tables, of which 12 are professional and on two 12-foot tables. A popular and well known club "LDM-Standard" – a place with hundreds of billiard tables (pool, snooker and billiards Russian), three rooms and a VIP billiard room. Often conducted in Russian billiard tournaments and attract a pool of athletes billiard players. It offers a game of table tennis, hot disco parties and banquets. Very nice place with responsive staff – a billiard club "Leader" in the same entertainment complex. One of the biggest clubs in Russia – only 80 tables (pool, snooker and pyramid), laser shooting Q-zar, restaurants and bars, a bowling alley and a cinema. Select your favorite billiard club, play pool and have the charge of a good mood for the whole week.

News

Links Contextual

Posted by Sylia on

We have often mentioned the need to build a good network of links that will help us improve our Pagerank and our organic positioning. And we have also clarified that not all links that link us are quality, and that we should aim to achieve incoming links from sites of good PR. The reality is that in terms of incoming links, is sometimes better few but good, that many and of poor quality. It is necessary at this point to clarify what we mean with bad quality links: links from link farms. Definitely, they are not places where we would like to be listed. It is not enough to check the PR of the site where our link is. It is also important to know how many outbound links have. Google is very smart, and two things immediately catch your attention: the titles as Webs Amigas, and the large amount of outbound links, especially when they are to websites of different nature (perfumeries, sites of bets, download programs, etc.).

Google said that it suggests that the sites do not have more than 100 links to other websites per page <>. And also draws attention to a momentous question: more links have one page shall be apportioned that PR between all the outgoing links, so ultimately, only a tiny part of the PR of the site will have the link site. The contextual links are links within relevant texts that are semantically related to the keywords you are looking for position. The most obvious example are the links that are included in articles in a blog. For example, if your blog is about dogs and other domestic animals, a contextual link is one that included for example in the phrase food for dogs, pointing to a site that speaks precisely of that. But if you include a link to a site on vacation in the Caribbean, there is no relationship with the theme of the blog. Consequently, it is not a quality link.

Contextual links generate trust and credibility by the search engines that we indexed, provide relevant information to our readers, and our PR increase. As a result, when we seek incoming links, it would be optimal if them were contextual. Examples of this can be articles that we write for other sites with the same theme, professional directories, or specialized sites. An excellent way to have contextual links pointing to our site may be through participation in specialized forums, or relevant to our subject communities. Achieve a network of contextual links linking us may take more time that simply buy links, or make exchanges with sites that are in bad neighborhoods, as same Google defines it. However, the result will be much better, and will be worth every minute of time invested. If you liked this post and want to place it on your site, you can do so smoothly, provided you cite as a source to original author and source of the article.

News

Portable Miniwarehouse

Posted by Sylia on

It facilitates your change with the rent of a portable miniwarehouse! If you are thinking about mudarte soon and you do not want to spend long time in the process, a good idea is to rent a portable miniwarehouse, in which you can keep from small things of your home to automobiles and the best thing is than you rent it by the time that you prefer! When rents a portable miniwarehouse you can store to diverse objects during days or weeks, would serve which you to realise the arrangement of your properties in your home to your own rate. In addition the portable miniwarehouses are placed in the place where you want. In Internet you can find thousand of companies dedicated the rent of miniwarehouses, nevertheless you must choose the one that agrees to you more according to your budget and to the time in which you will need the service. It remembers that you do not have to leave this search for the last moment, since if is therefore you will be bordering to choose a company that is not perhaps most advisable for you. A very important thing that you must do is to choose by companies of rent of miniwarehouses that offer guarantees to you.

If it got to happen some problem with your properties (robbery, damage, loss, etc.) they they will respond to you and compensate. Take into account that are certain companies that offer services to you of change and rent of miniwarehouses, this would be to you helpful so that you change yourself to your new home with tranquillity. An essential point is that you must ask for a budget in writing and fijarte in which includes good references of the company, as well as the predicted dates or the considered time in which you are going to need the portable miniwarehouse.

News

Design Features Of Ironing Boards

Posted by Sylia on

It is very welcome support for reliable iron, and well, if you will mount sockets, which will connect the iron. So you chose ironing board must meet all requirements, and to have a similar price. Design features of ironing boards The most simple design – a wooden board with rounded edges on folding legs, upholstered in fabric. Most often used for plywood board itself, and under the fabric can make up foam. These boards have the lowest cost, and some disadvantages.

The main drawback – the material board. Plywood under the influence of steam and moisture will eventually bend, turning a flat surface ironing board in the propeller. To neutralize this shortage, many manufacturers produce a surface of the metal. To facilitate the metal make the holes or slits. Stiffeners on the back side of the board makes the design more robust and do not allow the board sag. Locking mechanism is smooth and stepped. Smooth locking system can be mounted at any height, but eventually bumped not firmly holds the board.

For this reason it is better to prefer reliable fixation step. The legs should extend beyond the board width. That makes the board less compact in storage, but greatly increases stability. Feet below should be plastic or rubber caps, so as not to scratch the flooring. Painted enamel legs scratched and quickly lose their appearance, so it's stainless or chrome plating, although it is more expensive. Ironing board cover in inexpensive models are made of cotton. In the more expensive models, it is water proof non-stick made of synthetic material, which is much better. Many manufacturers make the case removable to allow replacement. Case no must shuffle around the board and securely fastened. As practice shows, the reference size ironing board: length 120-130 cm and 38-40 cm wide stand for iron is needed to prevent accidental drop the iron on the table. Agree pay a little for a comfortable stand is more profitable than to buy a new iron. Stand should be one with the board. Staples instead of the stand are not safe. Came with a small ironing board, ironing board hoses and all attachments are not used often, but increase the cost of the kit. Consider whether they are to you. Boards can also be equipped with additional shelves, brackets for hanging clothes hangers, etc. These make the design too bulky and heavy. Oddly items created for convenience, can make use of the ironing board is not very convenient. It also increases the cost of the board, so good consider whether it is for you. Finally conclusions derive the formula for reliable and convenient ironing board: Light board, which can easily pick up any hostess. Metal feet on the metal surface of stainless steel or chrome-plated screw. Staggered height adjustment. Soft non-stick waterproof case for the working surface. Strong support for the iron. Length of the working surface 120-130 cm, width 38-40 cm

News

The Coexistence

Posted by Sylia on

LM: of the heart. They are the first syllables of the names of the wife of Diego and my wife. Has it been difficult to handle a Publisher to duo? DC: Any endeavor you make duo have their ups and their downs as if it were the loving bond with your partner, I think the comparison with coexistence in a couple is the best way to illustrate a relationship where two people make decisions together and must learn to listen and be heard. A courtship or a marriage begins because you want to be happy and where they feel they need to be together to achieve that happiness, on the other hand a venture of a two launches with a premeditated aim and function to do this two people unite to achieve reach and exceed the goal. LM: not with Diego. I don’t know if it will be hard to do a Duet, but luckily with Diego is all quite simple.

It does not mean we think the same, but that we respect each other and above all do not limit any of each of our ideas that are even contradictory. We do everything that occurs to us, or try, and at least then one was right and the other is not. I admit that in our case the coexistence has been easy, and looking back I understand that to separate the tasks each one felt comfortable from the start and that allows us to be comfortable. Do you think that that could have achieved the same thing now with solo Publisher? Why? DC:no, although some ideas were mine, understand that it was enriched with the look of both and the execution of them was as expected. Basics of work in teams or alone, is the difference between know to listen to the other party or trying to be right.

News

To Eat In Sultana Is Wonderful

Posted by Sylia on

In order to live a fantastic experience around the food, one of the best options than you can choose is without a doubt Madrid sultana. This it is a site that is dedicated to the gastronomy of a special way, considering the variety of flavors and options that are interesting. This it is a site that does a tribute to him taste to the good table. For that reason it has so many followers who, without a doubt always put, it in the first place of the preferences. By all means that we cannot stop not knowing the precise details that make it deserving of this distinction. The attention to the client is one from the fundamental points where it is impossible not to park. The personnel very amiable, is dedicated, simple, arranged to offer (ace) at the table an opportunity to feel as much as in house.

Because the soul also must be connected to the palate of special way. The disposition of the tables is also interesting, because the place reflects a tradition that simply is showy until the degree of which the space is constituted in a factor of quite particular integration. This has in it obvious counts those points that are determining: the entrance, the corners, the baths Innovar is a concept that is applying the Sultana so that to repeat in this site he is a true one to please. By all means that this has become after a deep revision of letters and of all the options that are been giving the restaurant during a certain time. Interesting.

In this sense, it is worth the pain to reflect immense the affability that knowledge produces that is the restaurantero premises that do not fear to the deep changes after to have proven a formula during as much time. And they have known that it to recognize many people who are sensible, very sensible, to these characteristics. It does not mean that Sultana has changed its philosophy on watch and of supplies totally. Simply it has been known to adapt to changes that are necessary during the process of development of any business that wants to evolve. Besides it, it has counted with truly showy ideas that they have done to him well. The correct modulation of prices, the times of delivery of each one of the plates after orders, one more a more careful dedication towards the public, extended schedules more, are only some of the keys that are surrounded in these changes. It has been a slow process, but surely. Also it deserves to stand out showy and the flattering thing that can be the name in himself. And it is that indeed it evokes an important person, and this restaurant certainly is it. For that reason, it is that the title also lets welcome very in its way to all the people who want to enjoy the food. So, it knows already it. Sultana in Madrid is a restaurant that has known to maintain itself and that it has managed to adjust little by little to new measures that nothing stops have affected its essence. They have known before it to reinforce, and without a doubt that this it is a great merit. Great Reference:

News

Materials and Fabrics

Posted by Sylia on

The magnitude of these increases of specially calculated in accordance with the silhouette, the density of the material, as well as other factors. To understand why the pattern should be changed before the cutting of tissue, let's see how to drape fabric on a figure. It depends on the direction of fibers, which are located in the tissue in the shares and transverse directions perpendicular to each other. If when cutting prevent bias, ie the deviation of strands of vertical and horizontal directions, the fabric in the finished product will have a good time down unevenly. Next, specify how threads should be sent to every detail of the fabric for product lay perfectly.

Rack 1. Transverse thread runs between the arm-holes at 10 cm below the shoulders horizontally. 2. Transverse thread connects most prominent point chest and lower points of the armhole. 3.

Transverse thread runs horizontally at 5 cm above the waist between the side seams. 4. Lobar thread runs vertically from a point on the shoulder seam on approximately 6-7 cm from the base of the neck through the protruding point of the chest to the waist. Back 1. Transverse thread runs horizontally at 10 cm below the shoulder between the arm-holes. 2. Transverse thread runs horizontally between the arm-holes at the level of blades. 3. Transverse thread runs horizontally at 5 cm above the waist between the side seams, 4. Lobar thread runs vertically from a point on the shoulder seam (as on the shelf) to Talin. Sleeve 1. Typically, the pattern outlined point vertex sleeves. Lobar runs vertically from this point to lower edge. 2. Transverse thread runs horizontally through the head sleeve 7 -8 cm below the top of sleeve at right angles to share. Skirt 1. If at the midline of the anterior and Rear panels do not seam skirt, equity runs vertically from the waist to the bottom. If the skirt is extended downwards to the middle line is the seam, and the direction of share indicated on pattern. 2. Transverse thread runs horizontally front and rear side seams between the cloth for 17 – 18 cm below the waist.

News

Tips For Traveling To India In Summer

Posted by Sylia on

India has always been one of the favourite destinations for tourists from all over the world. Travel to India is synonymous with exotic spaces, culture, mythology, natural landscapes and culinary arts, as well as spirituality and meditation. In this article we offer advice as well as useful information to travel to India in summer, time in which India receives the largest number of visitors. Passports: Firstly, as in most of the trips abroad, we must have updated passport and validity; i.e., the passport must not overcome in the six month period following the presentation at the Customs Office. We must also count on the tourist visa, this is valid for six months. Generally, request a photocopy and original of the passages of round-trip and the preset route that will grant us travel agency that we have hired. Currency: The official currency of the India is the rupee, the easiest way is to take the money from the country of departure, or travellers cheques, this always will be more simple and more affordable than change the currency once has been reached. Legal tender coins can only be changed at bureaux de change.

If we take euros, in India we find sites where you can change them. Thus, do not need to change them earlier by U.S. dollars. Vaccines: dsi travels to india in summer, we must have the international certificate of vaccination against the current yellow fever 10 days before entering the country. Fine, now recommended to decide go on vacation there that, as a preventive measure, are also vaccinated against Hepatitis A and B, tetanus and typhoid. Special emphasis on the recruitment of some medical assistance insurance is made prior to performing the journey that once there, the conditions are not the most optimal. It is also recommended to always drink bottled water, it must be boiled or sterilized in order to not contract diseases or risks during the stay.